When I first started creating broken china mosaics, a.k.a. Pique Assiette, there was very little information available.I've created this How To to share some helpful hints and instructions that I learned through trial and error.
I am more than aware that art is a very subjective word. I just want to clarify my distinctions. My form is smooth, level, surfaces. I use professional grade grout and adhesives, I nip my own china and create my own focals. It is my intention to create pieces that will last through generations.
If you are looking to create heirloom pieces, here are a few key things to keep in mind:
FIRST: DO NOT SMASH YOUR PLATES WITH HAMMERS!! Leave the hammer to the nails.
SECOND: QUALITY MOSAICS REQUIRE TIME. Do not expect to finish a quality piece in a day or even a weekend. Mosaic is similar to knitting, it takes a bit of time for it to come out the way you want. Like knitting, it is possible to put the project down during the design stage (gluing/adhering tiles to the base) and return to it later. Unlike knitting, you can't take it everywhere you go.
THE BASICS STEPS:
1. Prep Your Mosaic Base ~ this is where you need to prime, seal, and paint the base you intend to mosaic. After the finish coat dries, it is time to mosaic.
2. Creating/Selecting Mosaic Tiles, Mosaic Focals, Laying Out Design ~ this is where you gather all of your nipped china tiles and focals, determine which method of you will use to create your Mosaic design and layout a design. You can always nip tiles as you go, but I encourage the basic china tiles and focals be laid out.
If you are using the direct or my direct press method, it is not necessary to layout all of your fill pieces; unless you are going to use different color fillers and want to be sure you are satisfied with the color combination. This is also your opportunity to see which tiles are the thickest. Do try to avoid extremes in the widths.
If you are using the indirect method, this is the time you will layout the design including the fill pieces before you transfer them face down into a mold or onto your contact paper or mosaic mount.
3. Adhering Tiles To the Mosaic Base ~ For direct or my direct press methods, this is whether you are using mortar or glue, be sure to always begin with the thickest focal or tiles first. These will be your anchor and sets the height for the rest of the tiles and focals. Use glue to set the anchors and thinset/mortar for the focals and tiles that are thinner.
For the indirect methods, this is where you will pour the wet concrete into the mold, or press the prepared section onto the mortared base.
4. Prep for Grouting ~ after the thinset/mortar has set for at least 24 hours, it is time to tape off the base to protect the paint finish from the wet grout. Painters tape is most effective.
5. Grouting The Mosaic Base ~ Mix and apply the grout, let dry for 15-20 minutes then clean the film off the tiles and focals. Remove any painters tape. Now is the time to add any gout to gaps or spaces you may have missed. It is also a good time to file or dremel any sharp edges. Sharp edges must be tended to before you seal the piece.
6. Sealing the Mosaic Design ~ After the grout has cured (at lease 48 hours) it is time to thoroughly seal the grout to protect it from stains and moisture. If you haven't filed or dremeled the sharp edges, be sure to do it before sealing.
7. Signing Your Mosaic ~ Always sign and date your creations. I use gold or silver paint pens. I usually sign the bottom of the pieces directly under the mosaic design.
There you have it. My 7 steps to creating a beautiful mosaic piece that will be cherished for years to come.
I've provided the following step-by-step detailed instruction that will guide you through the different process and help you achieve your desired results. Just click on the topic you need.
MOSAIC STYLE ~ PIQUE ASSIETTE DEFINED
MOSAIC METHODS ~ DIRECT, INDIRECT, MY DIRECT PRESS
HOW TO NIP CHINA TILES AND FOCALS
HOW TO CREATE A SMOOTH AND LEVEL MOSAIC SURFACE
SAFETY FIRST ~ AN IMPORTANT FIRST STEP
Please feel free to save my blog as I will be adding more information as often as I can. For now, those are the most important instructions and help hints that will definitely help you get started. You can always find a list of my How To's at the top of the left margin of my blog page.
Please note, my content is copyright with exclusive rights. Please do not copy my content (text, photographs, illustrations) into any printed form or any form of publication.
If you have any questions, please feel free to email me anytime. I am more than happy to help!
Happy creating!
tina ,do you ever use a dremmel tool to gind or cut the rims off the bottom of the plates? and if so i would love to have some tips. thankyou michelle
ReplyDeleteAh, the dreaded bottom rim. *sigh*
ReplyDeleteIf you have an expensive, fancy power grinder, the bottom rims can be a problem for the direct and my direct press method. They are no problem at all when you are using the Indirect Method.
I have used my dremel to grind it down. It is a lengthly process and it can eat up the bits pretty fast. I dremeled down a rim on a luncheon plate and it took me about 3 hours and 3 bits (and load of dust, so wear a mask, gloves to protect your hands and safety glasses, and do not do it indoors).
As a general rule, When I use the my direct press method, I just nip around them.
Good luck!
Tina
CORRECTION: The first paragraph should be "Bottom Rims are not too much of a problem, i=If you have an expensive. Otherwise, they can be..."
ReplyDeleteSorry about my faux pas!
Tina
I just found a box of my grandmother's precious china. I just sobbed as I found plates, sauces and platters broken. Just as I went to throw the scraps away, God whispered the idea of making something with the pieces. Using Pinterest, I found you! Do you gave an instruction sheet for dummies? Any help you can give me will help me preserve pieces this grand lady born in 1899, God rest her soul, so treasured. Thank you so much!
ReplyDelete